Midmark M11 Especificações descarregar pdf (Página 19)

hide

1.Press the ON / STANDBY button (1).

•The Selector / Indicator panel turns on (displays will illuminate).

•The Program Indicator lamps (2) flash until a sterilization program is

selected.

2.Close and latch the door; the sterilizer will not operate unless the door is

closed.

3.Select a sterilization program in accordance with the Standard Cycle

Parameters (see table later in this manual).

•The Temperature / Time display (3) displays the selected program’s

parameters alternately.

•If an incorrect program selection is made, select the correct program

cycle by pressing the correct program cycle button (2).

4.Press the START button (4).

NOTE

Before operating the sterilizer, be sure the door handle is completely de-

pressed (latched). If the handle is not fully latched, the sterilizer will alert the

operator with an audible beep and will not start until the door handle is

latched.

EQUIPMENT ALERT

Processing goods using an incorrect sterilization program could

result in unsterile goods and may damage instruments. Consult

with your supply manufacturer for specific sterilization instructions.

ON/STANDBY

ERROR

STOP

DOOR AJAR

START

WATER LOW

PACKS

COMPLETE

LIQUIDS

DRYING

POUCHES

STERILIZING

UNWRAPPED

FILLING

PRESSURE (PSI)

TEMP (

F) \ TIME (MIN : SECONDS)

6 98

MA439200

Operation

Return To Table Of Contents

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Comentários a estes Manuais

Sem comentários

Midmark M11 Especificações Página 19

Comentários a estes Manuais